How
to install local language packs Si8000 / Si9000 / SB200
Application Note 600
Si8000, Si9000 and SB200 are available in a number of localised editions:
Si8000m and SB200 language packs support software V5.00 and upwards.
Si8000m language pack installation
For Si8000m please download your localisation pack by clicking on your language below and following steps 1 to 6
| Si8000m | Version 5.00 |
|
Download |
|
Download |
|
Download |
|
Download |
| Deutsch | Download |
The installation
procedure for Si8000m language pack is as follows.
1. Download the relevant language translation zip file from the
Polar Instruments website
2. Locate the Si8000 language folder, normally c:\Program
Files\Polar\Si8000\Lang
3. Unzip the language translation zip and place the DLL file into
language folder (c:\Program Files\Polar\Si8000\Lang)
4. Start Si8000 Quick Solver and select the Configure - Language
Settings option
5. Using the Language Settings option, choose the appropriate language
DLL and select Apply to confirm
6. The Quick Solver will request that you restart the software.
Note: When selecting languages it is important to have the relevant
language packs installed within your Windows system. This is
especially important for East Asian languages, where it is also
necessary to ensure that the Control Panel - Regional Settings are set
appropriately.
Si9000e language pack installation
For Si9000e please download your localisation pack by clicking on your language below and following steps 1 to 6
| Si9000e | Version 6.10 |
|
|
Download |
| Deutsch | Download |
The installation
procedure for Si9000e language pack is as follows.
1. Download the relevant language translation zip file from the
Polar Instruments website
2. Locate the Si9000 language folder, normally c:\Program
Files\Polar\Si9000\Lang
3. Unzip the language translation zip and place the DLL file into
language folder (c:\Program Files\Polar\Si9000\Lang)
4. Start Si9000 Field Solver and select the Configure - Language
Settings option
5. Using the Language Settings option, choose the appropriate language
DLL and select Apply to confirm
6. The Field Solver will request that you restart the software.
Note: When selecting languages it is important to have the relevant
language packs installed within your Windows system. This is
especially important for East Asian languages, where it is also
necessary to ensure that the Control Panel - Regional Settings are set
appropriately.
SB200 language pack installation
SB200 packs are self installing.
1. Simply download the installer from the following link:
| SB200 | Version 5.xx |
|
|
Download |
|
|
Download |
|
|
Download |
|
|
Download |
| Deutsch | Download |
Once downloaded run the installer and restart the SB200.
Note: When selecting
languages it is important to have the relevant language packs installed
within your Windows system. This is especially important for East
Asian languages, where it is also necessary to ensure that the Control
Panel - Regional Settings are set appropriately.